14×20 Ground-Level Deck Plans
This 14′ × 20′ deck stands at ground level on skids. Joists are 2x6 at 16″ on center, resting on the skids. All 83 pieces of lumber are lettered below with their lengths and cuts, and the shopping list comes to 83 boards plus sheet goods and hardware.

Shopping list
Short pieces are cut from the offcuts of longer boards. Buy one spare of each size.
Parts and cut list
Cut every part, then pencil its letter on it. The steps call parts by letter.
| Part | Qty | Size | Length | Piece | How to cut |
|---|---|---|---|---|---|
| A | 3 | PT 4x6 | 240" | Skid | square both ends |
| B | 2 | PT 2x6 | 238-1/2" | Rim joist | square ends; laps the next piece at the corner |
| C | 2 | PT 2x6 | 166-1/2" | Rim joist | square ends; laps the next piece at the corner |
| D | 16 | PT 2x6 | 165" | Floor joist | square both ends |
| E | 30 | PT 5/4x6 | 143-15/16" | Deck board | square both ends |
| F | 30 | PT 5/4x6 | 95-15/16" | Deck board | square both ends |
Step by step
New pieces are in colour with their letters. Work already done is greyed out. Open it in the builder to turn the model and print the manual.

Lay the skids
A ×3 4x6 240"
- Compact 4" of gravel 2 ft past the footprint.
- Lay A parallel, level within 1/4".
rakelevel

Frame the floor
B ×2 2x6 238-1/2"C ×2 2x6 166-1/2"D ×16 2x6 165"
- Rims B, C around the outside, corners lapped as drawn.
- Mark joists every 16" along the rims.
- Joists D between the rims: 3 nails each end.
- Measure both diagonals. Equal = square.
sawhammersquaretape

Lay the decking
E ×30 5/4x6 143-15/16"F ×30 5/4x6 95-15/16"
- Start at the front edge. 1/8" gap between boards (a 16d nail).
- Two screws into every joist. Board ends only land on a joist.
drillsawchalk line
The proof
Every member was sized by calculation, and the 3D model was tested piece against piece. These are the results for this plan.
✓ No two pieces occupy the same space
All 83 pieces tested pairwise as exact solids (mitres, birdsmouths, cheek cuts, notched stringers): no overlap deeper than 1/50".
✓ Every piece is connected to the ground
All 83 pieces trace a chain of contact down to the foundation.
✓ Floor joists 2x6 47% used
2x6 SPF #2, span 6.85 ft, w = 67 plf total / 53 plf live Bending: M = wL²/8 = 4698 in·lb → fb = M/S = 621 psi ≤ F'b = 1308 psi (47% used) Shear: fv = 1.5V/A = 42 psi ≤ F'v = 135 psi (31% used) Deflection: 5wL⁴/384EI = 0.091" ≤ L/360 = 0.228" (40% used)
Floor: 40 psf live + 10 psf dead. 3 skids on 4" of compacted gravel, level within 1/4".
Questions
How much lumber does a 14x20 Ground-Level Deck need?
18 PT 2x6 × 14′, 2 PT 2x6 × 20′, 3 PT 4x6 × 20′, 30 PT 5/4x6 × 10′, 30 PT 5/4x6 × 14′. 2 boxes 2-1/2" deck screws (350/box).
What size joists does a 14x20 Ground-Level Deck need?
2x6 at 16″ on center, using 47% of capacity at 40 psf live load.
Can I change the size or add a door?
Yes. Open the plan in the builder, change any number, and the cuts, shopping list and checks update instantly.
14×20 Deck
14×20 Deck
14×20 Deck
16×16 Deck
16×16 Deck
16×16 Deck