Design your own

16×16 Ground-Level Deck Plans

This 16′ × 16′ deck stands at ground level on skids. Joists are 2x6 at 16″ on center, resting on the skids. All 90 pieces of lumber are lettered below with their lengths and cuts, and the shopping list comes to 90 boards plus sheet goods and hardware.

Footprint16′ 0″ × 16′ 0″
Area256 sq ft
Height1′ 0″
Lumber90 pcs
Steps3
Checks3 pass

Open in the builderJump to the steps

3D model of the 16×16 ground-level deck framing

Shopping list

17PT 2x6 × 16′
3PT 4x6 × 20′
35PT 5/4x6 × 8′
18PT 5/4x6 × 10′
17PT 5/4x6 × 12′
2boxes 2-1/2" deck screws (350/box)

Short pieces are cut from the offcuts of longer boards. Buy one spare of each size.

Parts and cut list

Cut every part, then pencil its letter on it. The steps call parts by letter.

PartQtySizeLengthPieceHow to cut
A3PT 4x6192"Skidsquare both ends
B4PT 2x6190-1/2"Rim joistsquare ends; laps the next piece at the corner
C13PT 2x6189"Floor joistsquare both ends
D17PT 5/4x6127-15/16"Deck boardsquare both ends
E18PT 5/4x6111-15/16"Deck boardsquare both ends
F18PT 5/4x679-15/16"Deck boardsquare both ends
G17PT 5/4x663-15/16"Deck boardsquare both ends

Step by step

New pieces are in colour with their letters. Work already done is greyed out. Open it in the builder to turn the model and print the manual.

  1. Step 1: Lay the skids

    Lay the skids

    A ×3 4x6 192"

    • Compact 4" of gravel 2 ft past the footprint.
    • Lay A parallel, level within 1/4".

    rakelevel

  2. Step 2: Frame the floor

    Frame the floor

    B ×4 2x6 190-1/2"C ×13 2x6 189"

    • Rims B around the outside, corners lapped as drawn.
    • Mark joists every 16" along the rims.
    • Joists C between the rims: 3 nails each end.
    • Measure both diagonals. Equal = square.

    sawhammersquaretape

  3. Step 3: Lay the decking

    Lay the decking

    D ×17 5/4x6 127-15/16"E ×18 5/4x6 111-15/16"F ×18 5/4x6 79-15/16"G ×17 5/4x6 63-15/16"

    • Start at the front edge. 1/8" gap between boards (a 16d nail).
    • Two screws into every joist. Board ends only land on a joist.

    drillsawchalk line

The proof

Every member was sized by calculation, and the 3D model was tested piece against piece. These are the results for this plan.

✓ No two pieces occupy the same space
All 90 pieces tested pairwise as exact solids (mitres, birdsmouths, cheek cuts, notched stringers): no overlap deeper than 1/50".
✓ Every piece is connected to the ground
All 90 pieces trace a chain of contact down to the foundation.
✓ Floor joists 2x6 62% used
2x6 SPF #2, span 7.85 ft, w = 67 plf total / 53 plf live
Bending: M = wL²/8 = 6169 in·lb → fb = M/S = 816 psi ≤ F'b = 1308 psi  (62% used)
Shear: fv = 1.5V/A = 48 psi ≤ F'v = 135 psi  (35% used)
Deflection: 5wL⁴/384EI = 0.157" ≤ L/360 = 0.262"  (60% used)

Floor: 40 psf live + 10 psf dead. 3 skids on 4" of compacted gravel, level within 1/4".

Questions

How much lumber does a 16x16 Ground-Level Deck need?

17 PT 2x6 × 16′, 3 PT 4x6 × 20′, 35 PT 5/4x6 × 8′, 18 PT 5/4x6 × 10′, 17 PT 5/4x6 × 12′. 2 boxes 2-1/2" deck screws (350/box).

What size joists does a 16x16 Ground-Level Deck need?

2x6 at 16″ on center, using 62% of capacity at 40 psf live load.

Can I change the size or add a door?

Yes. Open the plan in the builder, change any number, and the cuts, shopping list and checks update instantly.

Related plans

16×16 Deck256 sq ft · 110 pcs · 6 steps16×16 Deck256 sq ft · 276 pcs · 7 steps16×16 Deck256 sq ft · 280 pcs · 7 steps12×20 Deck240 sq ft · 95 pcs · 6 steps12×20 Deck240 sq ft · 259 pcs · 7 steps12×20 Deck240 sq ft · 263 pcs · 7 steps