Design your own

14′ Hexagon Deck Plans

This 6-sided, 8′ 1″ sides deck stands 30″ off the ground on posts on concrete footings. Joists are 2x8 at 16″ on center, carried by doubled 2x8 beams. All 59 pieces of lumber are lettered below with their lengths and cuts, and the shopping list comes to 54 boards plus sheet goods and hardware.

Footprint6-sided, 8′ 1″ sides
Area170 sq ft
Height2′ 6″
Lumber59 pcs
Steps5
Checks6 pass

Open in the builderJump to the steps

3D model of the 14′ hexagon deck framing

Shopping list

2PT 2x8 × 8′
12PT 2x8 × 10′
7PT 2x8 × 14′
1PT 4x4 × 8′
2PT 5/4x6 × 8′
7PT 5/4x6 × 10′
9PT 5/4x6 × 12′
6PT 5/4x6 × 14′
8PT 5/4x6 × 16′
0.43cubic yards concrete (+10%)
6post bases + post caps
1boxes 2-1/2" deck screws (350/box)

Short pieces are cut from the offcuts of longer boards. Buy one spare of each size.

Parts and cut list

Cut every part, then pencil its letter on it. The steps call parts by letter.

PartQtySizeLengthPieceHow to cut
A6PT 4x414-1/2"Postsquare both ends
B4PT 2x8101-5/8"Beam plysquare; 2 plies nailed together, 10d every 16" staggered
C5PT 2x8165"Floor joistsquare both ends
D1PT 2x8165"Floor joistends cut 60.0° off square
E1PT 2x8162-7/8"Floor joistends cut 60.0° off square
F1PT 2x8114-3/8"Floor joistends cut 60.0° off square
G1PT 2x8107-7/16"Floor joistends cut 60.0° off square
H6PT 2x897"Rim joistends cut to the 120.0° corner (30.0° mitre)
J1PT 2x858-15/16"Floor joistends cut 60.0° off square
K1PT 2x852"Floor joistends cut 60.0° off square
L1PT 5/4x6187-13/16"Deck boardends cut 30.0° off square
M1PT 5/4x6187-1/16"Deck boardends cut 30.0° off square
N1PT 5/4x6181-5/16"Deck boardends cut 30.0° off square
P1PT 5/4x6180-9/16"Deck boardends cut 30.0° off square
Q1PT 5/4x6174-13/16"Deck boardends cut 30.0° off square
R1PT 5/4x6174-1/16"Deck boardends cut 30.0° off square
S1PT 5/4x6168-5/16"Deck boardends cut 30.0° off square
T1PT 5/4x6167-9/16"Deck boardends cut 30.0° off square
U1PT 5/4x6161-13/16"Deck boardends cut 30.0° off square
V1PT 5/4x6161-1/8"Deck boardends cut 30.0° off square
W1PT 5/4x6155-5/16"Deck boardends cut 30.0° off square
X1PT 5/4x6154-5/8"Deck boardends cut 30.0° off square
Y1PT 5/4x6148-13/16"Deck boardends cut 30.0° off square
Z1PT 5/4x6148-1/8"Deck boardends cut 30.0° off square
AA1PT 5/4x6142-5/16"Deck boardends cut 30.0° off square
AB1PT 5/4x6141-5/8"Deck boardends cut 30.0° off square
AC1PT 5/4x6135-13/16"Deck boardends cut 30.0° off square
AD1PT 5/4x6135-1/8"Deck boardends cut 30.0° off square
AE1PT 5/4x6129-5/16"Deck boardends cut 30.0° off square
AF1PT 5/4x6128-5/8"Deck boardends cut 30.0° off square
AG1PT 5/4x6127-3/4"Deck boardends cut 30.0° off square
AH1PT 5/4x6122-13/16"Deck boardends cut 30.0° off square
AJ1PT 5/4x6122-1/8"Deck boardends cut 30.0° off square
AK1PT 5/4x6116-5/16"Deck boardends cut 30.0° off square
AL1PT 5/4x6115-5/8"Deck boardends cut 30.0° off square
AM1PT 5/4x6113-15/16"Deck boardends cut 30.0° off square
AN1PT 5/4x6109-7/8"Deck boardends cut 30.0° off square
AP1PT 5/4x6109-1/8"Deck boardends cut 30.0° off square
AQ1PT 5/4x6103-3/8"Deck boardends cut 30.0° off square
AR1PT 5/4x6102-5/8"Deck boardends cut 30.0° off square
AS1PT 5/4x679-15/16"Deck boardends cut 30.0° off square
AT1PT 5/4x665-3/4"Deck boardends cut 30.0° off square

Step by step

New pieces are in colour with their letters. Work already done is greyed out. Open it in the builder to turn the model and print the manual.

  1. Step 1: Dig and pour the footings

    Dig and pour the footings

    • Stake out 6 post spots exactly where the picture shows.
    • Dig each hole Ø20" wide, below your frost line.
    • Pour concrete. Set a post base in each one, all level with a string line.

    shovelstring linelevel

  2. Step 2: Stand the posts

    Stand the posts

    A ×6 4x4 14-1/2"

    • Cut posts A to the length in the box.
    • Fix each to its base. Plumb on two faces. Brace both ways.

    sawleveldrill

  3. Step 3: Set the beams

    Set the beams

    B ×4 2x8 101-5/8"

    • Nail each pair of B plies together, 10d nails every 16", staggered.
    • Crown up. Set on the posts and fix with post caps.

    sawhammerlevel

  4. Step 4: Frame the floor

    Frame the floor

    C ×5 2x8 165"D ×1 2x8 165"E ×1 2x8 162-7/8"F ×1 2x8 114-3/8"G ×1 2x8 107-7/16"H ×6 2x8 97"J ×1 2x8 58-15/16"K ×1 2x8 52"

    • Rims H around the outside, corners lapped as drawn.
    • Mark joists every 16" along the rims.
    • Joists C, D, E, F, G, J, K between the rims: 3 nails each end.
    • Measure both diagonals. Equal = square.

    sawhammersquaretape

  5. Step 5: Lay the decking

    Lay the decking

    L ×1 5/4x6 187-13/16"M ×1 5/4x6 187-1/16"N ×1 5/4x6 181-5/16"P ×1 5/4x6 180-9/16"Q ×1 5/4x6 174-13/16"R ×1 5/4x6 174-1/16"S ×1 5/4x6 168-5/16"T ×1 5/4x6 167-9/16"U ×1 5/4x6 161-13/16"V ×1 5/4x6 161-1/8"W ×1 5/4x6 155-5/16"X ×1 5/4x6 154-5/8"Y ×1 5/4x6 148-13/16"Z ×1 5/4x6 148-1/8"AA ×1 5/4x6 142-5/16"AB ×1 5/4x6 141-5/8"AC ×1 5/4x6 135-13/16"AD ×1 5/4x6 135-1/8"AE ×1 5/4x6 129-5/16"AF ×1 5/4x6 128-5/8"AG ×1 5/4x6 127-3/4"AH ×1 5/4x6 122-13/16"AJ ×1 5/4x6 122-1/8"AK ×1 5/4x6 116-5/16"AL ×1 5/4x6 115-5/8"AM ×1 5/4x6 113-15/16"AN ×1 5/4x6 109-7/8"AP ×1 5/4x6 109-1/8"AQ ×1 5/4x6 103-3/8"AR ×1 5/4x6 102-5/8"AS ×1 5/4x6 79-15/16"AT ×1 5/4x6 65-3/4"

    • Start at the front edge. 1/8" gap between boards (a 16d nail).
    • Two screws into every joist. Board ends only land on a joist.

    drillsawchalk line

The proof

Every member was sized by calculation, and the 3D model was tested piece against piece. These are the results for this plan.

✓ No two pieces occupy the same space
All 59 pieces tested pairwise as exact solids (mitres, birdsmouths, cheek cuts, notched stringers): no overlap deeper than 1/50".
✓ Every piece is connected to the ground
All 65 pieces trace a chain of contact down to the foundation.
✓ Floor joists 2x8 88% used
2x8 SPF #2, span 11.75 ft, w = 67 plf total / 53 plf live
Bending: M = wL²/8 = 13808 in·lb → fb = M/S = 1051 psi ≤ F'b = 1208 psi  (87% used)
Shear: fv = 1.5V/A = 54 psi ≤ F'v = 135 psi  (40% used)
Deflection: 5wL⁴/384EI = 0.343" ≤ L/360 = 0.392"  (88% used)
✓ Deck beams (2-ply) 2x8 67% used
2-ply 2x8 SPF #2, span 4.09 ft, w = 638 plf total / 510 plf live
Bending: M = wL²/8 = 15984 in·lb → fb = M/S = 608 psi ≤ F'b = 1050 psi  (58% used)
Shear: fv = 1.5V/A = 90 psi ≤ F'v = 135 psi  (67% used)
Deflection: 5wL⁴/384EI = 0.024" ≤ L/360 = 0.136"  (18% used)
✓ Floor posts 4x4 16% used
4x4 SPF #2, height 1.21 ft, le/d = 4.1 ≤ 50
FcE = 24425 psi → Cp = 0.989 → capacity 16019 lb ≥ load 2606 lb (16% used)
✓ Footings 84% used
Load 2756 lb ÷ 1500 psf presumptive soil bearing = 265 in² needed
20" round footing = 314 in² (84% used). Bottom below your local frost depth.

Floor: 40 psf live + 10 psf dead. Footings bear on undisturbed soil below frost depth (1500 psf soil assumed). Post bases and post caps at every post.

Questions

How much lumber does a 14′ Hexagon Deck need?

2 PT 2x8 × 8′, 12 PT 2x8 × 10′, 7 PT 2x8 × 14′, 1 PT 4x4 × 8′, 2 PT 5/4x6 × 8′, 7 PT 5/4x6 × 10′, 9 PT 5/4x6 × 12′, 6 PT 5/4x6 × 14′, 8 PT 5/4x6 × 16′. 0.43 cubic yards concrete (+10%); 6 post bases + post caps; 1 boxes 2-1/2" deck screws (350/box).

What size joists does a 14′ Hexagon Deck need?

2x8 at 16″ on center, using 88% of capacity at 40 psf live load.

How big do the footings need to be?

20″ round, 6 of them, bearing below your local frost line. That assumes 1,500 psf soil.

Does a 14′ Hexagon Deck need a railing?

Not by code at 30″; guards are required above 30″. You can add one in the builder.

Can I change the size or add a door?

Yes. Open the plan in the builder, change any number, and the cuts, shopping list and checks update instantly.

Related plans

10×12 Deck120 sq ft · 57 pcs · 6 steps10×12 Deck120 sq ft · 171 pcs · 7 steps10×12 Deck120 sq ft · 175 pcs · 7 steps10×12 Ground-Level Deck120 sq ft · 38 pcs · 3 steps8′ Octagon Deck54 sq ft · 41 pcs · 5 steps10′ Octagon Deck82 sq ft · 47 pcs · 5 steps