16′ Hexagon Deck Plans
This 6-sided, 9′ 3″ sides deck stands 30″ off the ground on posts on concrete footings. Joists are 2x10 at 16″ on center, carried by doubled 2x8 beams. All 75 pieces of lumber are lettered below with their lengths and cuts, and the shopping list comes to 70 boards plus sheet goods and hardware.

Shopping list
Short pieces are cut from the offcuts of longer boards. Buy one spare of each size.
Parts and cut list
Cut every part, then pencil its letter on it. The steps call parts by letter.
| Part | Qty | Size | Length | Piece | How to cut |
|---|---|---|---|---|---|
| A | 6 | PT 4x4 | 12-1/2" | Post | square both ends |
| B | 4 | PT 2x8 | 115-5/8" | Beam ply | square; 2 plies nailed together, 10d every 16" staggered |
| C | 7 | PT 2x10 | 189-1/4" | Floor joist | square both ends |
| D | 1 | PT 2x10 | 162-7/8" | Floor joist | ends cut 60.0° off square |
| E | 1 | PT 2x10 | 155-15/16" | Floor joist | ends cut 60.0° off square |
| F | 6 | PT 2x10 | 111" | Rim joist | ends cut to the 120.0° corner (30.0° mitre) |
| G | 1 | PT 2x10 | 107-7/16" | Floor joist | ends cut 60.0° off square |
| H | 1 | PT 2x10 | 100-1/2" | Floor joist | ends cut 60.0° off square |
| J | 1 | PT 2x10 | 52" | Floor joist | ends cut 60.0° off square |
| K | 1 | PT 2x10 | 45-1/8" | Floor joist | ends cut 60.0° off square |
| L | 1 | PT 5/4x6 | 188-13/16" | Deck board | ends cut 30.0° off square |
| M | 1 | PT 5/4x6 | 183-5/8" | Deck board | ends cut 30.0° off square |
| N | 1 | PT 5/4x6 | 182-5/16" | Deck board | ends cut 30.0° off square |
| P | 1 | PT 5/4x6 | 177-1/8" | Deck board | ends cut 30.0° off square |
| Q | 1 | PT 5/4x6 | 175-13/16" | Deck board | ends cut 30.0° off square |
| R | 1 | PT 5/4x6 | 170-5/8" | Deck board | ends cut 30.0° off square |
| S | 1 | PT 5/4x6 | 169-5/16" | Deck board | ends cut 30.0° off square |
| T | 1 | PT 5/4x6 | 164-1/8" | Deck board | ends cut 30.0° off square |
| U | 1 | PT 5/4x6 | 162-13/16" | Deck board | ends cut 30.0° off square |
| V | 1 | PT 5/4x6 | 157-5/8" | Deck board | ends cut 30.0° off square |
| W | 1 | PT 5/4x6 | 156-5/16" | Deck board | ends cut 30.0° off square |
| X | 1 | PT 5/4x6 | 151-1/8" | Deck board | ends cut 30.0° off square |
| Y | 1 | PT 5/4x6 | 149-13/16" | Deck board | ends cut 30.0° off square |
| Z | 1 | PT 5/4x6 | 144-5/8" | Deck board | ends cut 30.0° off square |
| AA | 1 | PT 5/4x6 | 143-5/16" | Deck board | ends cut 30.0° off square |
| AB | 1 | PT 5/4x6 | 141-9/16" | Deck board | ends cut 30.0° off square |
| AC | 1 | PT 5/4x6 | 139" | Deck board | ends cut 30.0° off square |
| AD | 1 | PT 5/4x6 | 138-1/8" | Deck board | ends cut 30.0° off square |
| AE | 1 | PT 5/4x6 | 136-13/16" | Deck board | ends cut 30.0° off square |
| AF | 1 | PT 5/4x6 | 135-1/16" | Deck board | ends cut 30.0° off square |
| AG | 1 | PT 5/4x6 | 132-1/2" | Deck board | ends cut 30.0° off square |
| AH | 1 | PT 5/4x6 | 131-5/8" | Deck board | ends cut 30.0° off square |
| AJ | 1 | PT 5/4x6 | 130-5/16" | Deck board | ends cut 30.0° off square |
| AK | 1 | PT 5/4x6 | 128-9/16" | Deck board | ends cut 30.0° off square |
| AL | 1 | PT 5/4x6 | 127-15/16" | Deck board | ends cut 30.0° off square |
| AM | 1 | PT 5/4x6 | 126" | Deck board | ends cut 30.0° off square |
| AN | 1 | PT 5/4x6 | 125-1/8" | Deck board | ends cut 30.0° off square |
| AP | 1 | PT 5/4x6 | 124-5/16" | Deck board | ends cut 30.0° off square |
| AQ | 1 | PT 5/4x6 | 123-7/8" | Deck board | ends cut 30.0° off square |
| AR | 1 | PT 5/4x6 | 121-3/4" | Deck board | ends cut 30.0° off square |
| AS | 1 | PT 5/4x6 | 118-11/16" | Deck board | ends cut 30.0° off square |
| AT | 1 | PT 5/4x6 | 117-13/16" | Deck board | ends cut 30.0° off square |
| AU | 1 | PT 5/4x6 | 117-3/8" | Deck board | ends cut 30.0° off square |
| AV | 1 | PT 5/4x6 | 115-1/4" | Deck board | ends cut 30.0° off square |
| AW | 1 | PT 5/4x6 | 112-3/16" | Deck board | ends cut 30.0° off square |
| AX | 1 | PT 5/4x6 | 93-15/16" | Deck board | ends cut 30.0° off square |
| AY | 1 | PT 5/4x6 | 90-5/16" | Deck board | ends cut 30.0° off square |
| AZ | 1 | PT 5/4x6 | 87-3/4" | Deck board | ends cut 30.0° off square |
| BA | 1 | PT 5/4x6 | 83-13/16" | Deck board | ends cut 30.0° off square |
| BB | 1 | PT 5/4x6 | 81-1/4" | Deck board | ends cut 30.0° off square |
| BC | 1 | PT 5/4x6 | 79-9/16" | Deck board | ends cut 30.0° off square |
| BD | 1 | PT 5/4x6 | 77" | Deck board | ends cut 30.0° off square |
| BE | 1 | PT 5/4x6 | 73-1/16" | Deck board | ends cut 30.0° off square |
| BF | 1 | PT 5/4x6 | 70-1/2" | Deck board | ends cut 30.0° off square |
| BG | 1 | PT 5/4x6 | 66-9/16" | Deck board | ends cut 30.0° off square |
| BH | 1 | PT 5/4x6 | 64" | Deck board | ends cut 30.0° off square |
Step by step
New pieces are in colour with their letters. Work already done is greyed out. Open it in the builder to turn the model and print the manual.

Dig and pour the footings
- Stake out 6 post spots exactly where the picture shows.
- Dig each hole Ø24" wide, below your frost line.
- Pour concrete. Set a post base in each one, all level with a string line.
shovelstring linelevel

Stand the posts
A ×6 4x4 12-1/2"
- Cut posts A to the length in the box.
- Fix each to its base. Plumb on two faces. Brace both ways.
sawleveldrill

Set the beams
B ×4 2x8 115-5/8"
- Nail each pair of B plies together, 10d nails every 16", staggered.
- Crown up. Set on the posts and fix with post caps.
sawhammerlevel

Frame the floor
C ×7 2x10 189-1/4"D ×1 2x10 162-7/8"E ×1 2x10 155-15/16"F ×6 2x10 111"G ×1 2x10 107-7/16"H ×1 2x10 100-1/2"J ×1 2x10 52"K ×1 2x10 45-1/8"
- Rims F around the outside, corners lapped as drawn.
- Mark joists every 16" along the rims.
- Joists C, D, E, G, H, J, K between the rims: 3 nails each end.
- Measure both diagonals. Equal = square.
sawhammersquaretape

Lay the decking
L ×1 5/4x6 188-13/16"M ×1 5/4x6 183-5/8"N ×1 5/4x6 182-5/16"P ×1 5/4x6 177-1/8"Q ×1 5/4x6 175-13/16"R ×1 5/4x6 170-5/8"S ×1 5/4x6 169-5/16"T ×1 5/4x6 164-1/8"U ×1 5/4x6 162-13/16"V ×1 5/4x6 157-5/8"W ×1 5/4x6 156-5/16"X ×1 5/4x6 151-1/8"Y ×1 5/4x6 149-13/16"Z ×1 5/4x6 144-5/8"AA ×1 5/4x6 143-5/16"AB ×1 5/4x6 141-9/16"AC ×1 5/4x6 139"AD ×1 5/4x6 138-1/8"AE ×1 5/4x6 136-13/16"AF ×1 5/4x6 135-1/16"AG ×1 5/4x6 132-1/2"AH ×1 5/4x6 131-5/8"AJ ×1 5/4x6 130-5/16"AK ×1 5/4x6 128-9/16"AL ×1 5/4x6 127-15/16"AM ×1 5/4x6 126"AN ×1 5/4x6 125-1/8"AP ×1 5/4x6 124-5/16"AQ ×1 5/4x6 123-7/8"AR ×1 5/4x6 121-3/4"AS ×1 5/4x6 118-11/16"AT ×1 5/4x6 117-13/16"AU ×1 5/4x6 117-3/8"AV ×1 5/4x6 115-1/4"AW ×1 5/4x6 112-3/16"AX ×1 5/4x6 93-15/16"AY ×1 5/4x6 90-5/16"AZ ×1 5/4x6 87-3/4"BA ×1 5/4x6 83-13/16"BB ×1 5/4x6 81-1/4"BC ×1 5/4x6 79-9/16"BD ×1 5/4x6 77"BE ×1 5/4x6 73-1/16"BF ×1 5/4x6 70-1/2"BG ×1 5/4x6 66-9/16"BH ×1 5/4x6 64"
- Start at the front edge. 1/8" gap between boards (a 16d nail).
- Two screws into every joist. Board ends only land on a joist.
drillsawchalk line
The proof
Every member was sized by calculation, and the 3D model was tested piece against piece. These are the results for this plan.
✓ No two pieces occupy the same space
All 75 pieces tested pairwise as exact solids (mitres, birdsmouths, cheek cuts, notched stringers): no overlap deeper than 1/50".
✓ Every piece is connected to the ground
All 81 pieces trace a chain of contact down to the foundation.
✓ Floor joists 2x10 80% used
2x10 SPF #2, span 13.77 ft, w = 67 plf total / 53 plf live Bending: M = wL²/8 = 18965 in·lb → fb = M/S = 887 psi ≤ F'b = 1107 psi (80% used) Shear: fv = 1.5V/A = 50 psi ≤ F'v = 135 psi (37% used) Deflection: 5wL⁴/384EI = 0.312" ≤ L/360 = 0.459" (68% used)
✓ Deck beams (2-ply) 2x8 88% used
2-ply 2x8 SPF #2, span 4.67 ft, w = 739 plf total / 591 plf live Bending: M = wL²/8 = 24178 in·lb → fb = M/S = 920 psi ≤ F'b = 1050 psi (88% used) Shear: fv = 1.5V/A = 119 psi ≤ F'v = 135 psi (88% used) Deflection: 5wL⁴/384EI = 0.047" ≤ L/360 = 0.156" (30% used)
✓ Floor posts 4x4 21% used
4x4 SPF #2, height 1.04 ft, le/d = 3.6 ≤ 50 FcE = 32867 psi → Cp = 0.992 → capacity 16067 lb ≥ load 3450 lb (21% used)
✓ Footings 76% used
Load 3600 lb ÷ 1500 psf presumptive soil bearing = 346 in² needed 24" round footing = 452 in² (76% used). Bottom below your local frost depth.
Floor: 40 psf live + 10 psf dead. Footings bear on undisturbed soil below frost depth (1500 psf soil assumed). Post bases and post caps at every post.
Questions
How much lumber does a 16′ Hexagon Deck need?
2 PT 2x10 × 8′, 8 PT 2x10 × 10′, 2 PT 2x10 × 14′, 7 PT 2x10 × 16′, 4 PT 2x8 × 10′, 1 PT 4x4 × 8′, 11 PT 5/4x6 × 8′, 5 PT 5/4x6 × 10′, 16 PT 5/4x6 × 12′, 7 PT 5/4x6 × 14′, 7 PT 5/4x6 × 16′. 0.61 cubic yards concrete (+10%); 6 post bases + post caps; 2 boxes 2-1/2" deck screws (350/box).
What size joists does a 16′ Hexagon Deck need?
2x10 at 16″ on center, using 80% of capacity at 40 psf live load.
How big do the footings need to be?
24″ round, 6 of them, bearing below your local frost line. That assumes 1,500 psf soil.
Does a 16′ Hexagon Deck need a railing?
Not by code at 30″; guards are required above 30″. You can add one in the builder.
Can I change the size or add a door?
Yes. Open the plan in the builder, change any number, and the cuts, shopping list and checks update instantly.
10×12 Deck
10×12 Deck
10×12 Deck
10×12 Ground-Level Deck
8′ Octagon Deck
10′ Octagon Deck